Question 1

For the programmed timer circuit shown, the pilot light should come on:

Accepted Answer

A)  as soon as the switch is closed.
B)  before the switch is closed.
C)  for 15 seconds after the switch is opened.
D)  as soon as the switch is closed and for 15 seconds after the switch is opened.E) A) and B)
F) B) and D)

Question 2

The relay contact drawn is designed to operate so that:

Accepted Answer

A)  when the relay coil is energized, there is a time delay in closing.
B)  when the relay coil is energized, there is a time delay in opening.
C)  when the relay coil is de-energized, there is a time delay before the contact opens.
D)  when the relay coil is de-energized, there is a time delay before the contact closes.E) A) and D)
F) None of the above

Question 3

The main difference between a TON and TOF timer is that the:

Accepted Answer

A)  TON timer can maintain its accumulated time on loss of power or logic continuity.
B)  TOF timer can maintain its accumulated time on loss of power or logic continuity.
C)  TOF timer begins timing when logic continuity to the timing rung is lost.
D)  TON timer begins timing when logic continuity to the timing rung is lost.E) A) and C)
F) A) and B)

Question 4

When the timing of a device is not reset on a loss of power, the timing is said to be:

Accepted Answer

A)  continuous
B)  holding
C)  retentive
D)  savedE) A) and D)
F) B) and C)

Question 5

For the timer relay contact shown, when the relay coil is de-energized, there is a time delay before the contact closes.

Accepted Answer

A) True 
 B)False

Question 6

The on-delay timer (TON)  starts timing when the timer's:

Accepted Answer

A)  ladder rung switches from false to true.
B)  ladder rung switches from true to false.
C)  accumulated value equals its preset value.
D)  accumulated value is greater than its preset value.E) None of the above
F) B) and D)

Question 7

For the program shown, the timer accumulated time is set to zero anytime:

Accepted Answer

A)  PB1 is closed.
B)  PB2 is closed.
C)  PB1 is open.
D)  PB2 is open.E) All of the above
F) A) and B)

Question 8

RES instructions are used with:

Accepted Answer

A)  TOF timers
B)  TON timers
C)  RTO timers
D)  all of theseE) All of the above
F) A) and B)

Question 9

For the hardwired timer circuit shown, contact TD-1 is the ____ contact and TD-2 is the ____ contact.

Accepted Answer

A)  ON, OFF
B)  OFF, ON
C)  instantaneous, timed
D)  timed, instantaneousE) None of the above
F) A) and B)

Question 10

Which one of the following timer parameters determines the accuracy of the timer?

Accepted Answer

A)  Accumulated time.
B)  Preset time.
C)  Timer address.
D)  Time base.E) A) and B)
F) A) and C)

Exam 5: Programming Timers

Which one of the following timer parameters determines the accuracy of the timer?

Correct Answer
verified

For the program shown, the timer accumulated time is set to zero anytime:

Correct Answer
verified

The main difference between a TON and TOF timer is that the:

Correct Answer
verified

For the timer relay contact shown, when the relay coil is de-energized, there is a time delay before the contact closes.

Correct Answer
verified

For the hardwired timer circuit shown, contact TD-1 is the contact and TD-2 is the contact.

Correct Answer
verified

When the timing of a device is not reset on a loss of power, the timing is said to be:

Correct Answer
verified

The on-delay timer (TON) starts timing when the timer's:

Correct Answer
verified

For the programmed timer circuit shown, the pilot light should come on:

Correct Answer
verified

RES instructions are used with:

Correct Answer
verified

The relay contact drawn is designed to operate so that:

Correct Answer
verified

Exam 5: Programming Timers

Which one of the following timer parameters determines the accuracy of the timer?

Correct AnswerverifiedShow Answer

For the program shown, the timer accumulated time is set to zero anytime:

Correct AnswerverifiedShow Answer

The main difference between a TON and TOF timer is that the:

Correct AnswerverifiedShow Answer

For the timer relay contact shown, when the relay coil is de-energized, there is a time delay before the contact closes.

Correct AnswerverifiedShow Answer

For the hardwired timer circuit shown, contact TD-1 is the ____ contact and TD-2 is the ____ contact.

Correct AnswerverifiedShow Answer

When the timing of a device is not reset on a loss of power, the timing is said to be:

Correct AnswerverifiedShow Answer

The on-delay timer (TON) starts timing when the timer's:

Correct AnswerverifiedShow Answer

For the programmed timer circuit shown, the pilot light should come on:

Correct AnswerverifiedShow Answer

RES instructions are used with:

Correct AnswerverifiedShow Answer

The relay contact drawn is designed to operate so that:

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

For the hardwired timer circuit shown, contact TD-1 is the contact and TD-2 is the contact.

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified